Sf850 AC Frequency Inverter - AC Inverter - Vvvf Inverter

• Application: High-performance Transducer, Three Phase Transducer, Single-phase Transducer
• Output Type: Triple
• Principle of Work: Vector Control Transducer
• Switch Mode: PWM Control
• Main Circuit Type: Current
• Voltage of Power Supply: Low Voltage Variable-Frequency Drive
• Model NO.: SF850
• Link of Transformation: AC-DC-AC Variable-Frequency Drive
• Nature of DC Power: Current Variable-Frequency Drive
• Function: Simple Type, Elevator Special, Textile Special, Constant Torque Universal Type
• Brand: Sineford
• Unique Feature: Modular Design
• OEM Production: Avaiable
• Applicable Motor Type: Three Phase Synchronous and Asynchronous Motors
• Expansion Modules: Avaiable
• Transport Package: Carton or Pallet
• Trademark: SINEFORD
• Origin: China
• HS Code: 85044099
• Production Capacity: 5000PCS/Month

Product Description

Product Description

Sf850 AC frequency inverter - ac inverter - vvvf inverter

Main Introduction:
SF850 series drive is a universal magnetic flux vector drive, using a new modular design concept, mainly used to control and adjust the speed and torque of the three-phase asynchronous/synchronous motors, can be used for textile, paper, wire drawing, machine tools, packaging, food, fan, water pumps and a variety of automatic production equipment.

Product Characteristics:
SF850 series drive adopts the European-type modular design scheme. Unique structural design.
Make everything easy in the process of use!


1.Easy to install
* Key hole design
* Guide rail installation 
* Spring-snap control terminal, no screwdriver required.

2.Convenient application
* Change the control module arbitrarily
* Can expand multifunctional I/O module, PG card and bus module at will
* Add software application macros for easy debugging
* Parameter copy function.

3.Simple after-sales repair
(1) It can be replaced damaged unit, such as OP panel, CM control module, 
PM power module, PG expansion module, fan;
(2) When the PM is damaged, there is no need to replace the CM, which is 
convenient to replace without adjusting the parameters and control lines,
greatly saving the after-sales cost and labor cost.
 

Detailed Photos

Product Parameters

 

Models and nameplate:


Tecnical Datas:

Size	Drive model	Output capacity (KVA)	Input current (A)	Output current (A)	Suitable Motor (KW)
	2S:Single-phase AC220~240V,50Hz/60Hz
A1	2S-0.4GB	1.4	5.4	2.3	0.4
	2S-0.75GB	2.2	8.2	4	0.75
	2S-1.5GB	3.7	14	7	1.5
	2S-2.2GB	6	23	9.6	2.2
A2	2S-4.0GB	10	32	13	4

Size	Drive model	Output capacity (KVA)	Input current (A)	Output current (A)	Suitable Motor (KW)
	2T:Three-phase AC220~240V,50Hz/60Hz
A1	2T-0.4GB	1.1	2.4	2.1	0.4
	2T-0.75GB	2.1	4.6	3.8	0.75
	2T-1.5GB	4.2	9	7.2	1.5
	2T-2.2GB	5.3	11.4	9	2.2
A2	2T-4.0GB	7.7	16.7	13	4
A3	2T-5.5GB	14.8	32	25	5.5
	2T-7.5GB	18.9	41	32	7.5
A4	2T-11GB	27	59	45	11
A5	2T-15GB	30	62	60	15
A6	2T-18.5G	31.6	69	75	18.5
A7	2T-22G	42	90	91	22
	2T-30G	49	106	112	30
	2T-37G	64	141	150	37
A8	2T-45G	75	164	176	45
A9	2T-55G	90	201	210	55
A10	2T-75G	123	307	304	75

 

Size	Drive model	Output capacity (KVA)	Input current (A)	Output current (A)	Suitable Motor (KW)
	4T:Three-phase AC380~440V,50Hz/60Hz
A1	4T-0.75G/1.5PB	1.5	2.4/4.0	2.1/3.8	0.75/1.5
	4T-1.5G/2.2PB	3	4.0/5.8	3.8/5.1	1.5/2.2
	4T-2.2G/4.0PB	4	5.8/10.5	5.1/9.0	2.2/4.0
	4T-4.0GB	5.9	10.5	9	4
A2	4T-4.0G/5.5PB	5.9	10.5/14.6	9.0/13	4.0/5.5
	4T-5.5G/7.5PB	8.9	14.6/20.5	13/17	5.5/7.5
	4T-7.5GB	11	20.5	17	7.5
A3	4T-7.5G/11PB	11	20.5/26	17/25	7.5/11
	4T-11G/15PB	17	26/35	25/32	11/15
	4T-15GB	21	35	32	15
A4	4T-15G/18.5PB	21	35/38.5	32/37	15/18.8
	4T-18.5G/22PB	24	38.5/46.5	37/45	18.5/22
	4T-22GB	30	46.5	45	22
A5	4T-22G/30PB	30	46.5/62	45/60	22/30
	4T-30GB	40	62	60	30
A6	4T-30G/37P	40	62/76	60/75	30/37
	4T-37G/45P	57	76/92	75/91	37/45
A7	4T-45G/55P	69	92/113	91/112	45/55
	4T-55G/75P	85	113/157	112/150	55/75
	4T-75G	114	157	150	75
A8	4T-75G/90P	114	157/180	150/176	75/90
	4T-90G/110P	134	180/214	176/210	90/110
A9	4T-110G/132P	160	214/256	210/253	110/132
A10	4T-132G/160P	192	256/307	253/304	132/160
	4T-160G/185P	231	307/350	304/340	160/185
A11	4T-185G/200P	242	350/385	340/377	185/200
	4T-200G/220P	250	385/430	377/426	200/220
	4T-220G/250P	280	430/468	426/465	220/250
A12	4T-250G/280P	355	468/525	465/520	250/280
A13	4T-280G/315P	396	525/590	520/585	280/315
	4T-315G/355P	445	590/665	585/650	315/355
A14	4T-355G/400P	500	665/785	650/725	355/400
A15	4T-400G/450P	565	785/883	725/800	400/450
	4T-450G/500P	630	883/950	800/860	450/500
A16	4T-500G/560P	750	950/1000	860/950	500/560
	4T-560G/630P	840	1000/1210	950/1140	560/630
	4T-630G/710P	945	1210/1380	1140/1300	630/710

 

Item		Specifications
Input	Rated voltage, rated frequency	2S: AC 1Phase 220V~240V, 50/60 HZ 2T: AC 3Phase 220V~240V, 50/60 HZ 4T: AC 3Phase 380V~440V, 50/60 HZ
	Voltage allowable fluctuation range	2S/2T: -15%~10%, actual allowable range: AC 187V~264V 4T: -15%~10%, actual allowable range: AC 323V~484V
	Frequency allowable fluctuation range	-5%~5%, actual allowable range: 47.5HZ~63HZ
Output	Output voltage (V)	AC 3phase 0~input voltage
	Maximum output frequency	500HZ
Basic Function	Maximum  frequency	Vector control: 0~ 500Hz V/F control: 0~ 500Hz
	Carrier frequency	0.5kHz~ 16kHz The carrier frequency can be automatically adjusted according to the load characteristics.
	Input frequency resolution	Digital setting: 0.01Hz Analog setting: maximum frequency ×0.025%
	Control mode	Sensorless Vector Control (SVC) Flux Vector Control (FVC) V/F Control
	Starting torque	G:  0.5Hz/150%(SVC); 0Hz/180%(FVC)
		P:  0.5Hz/100%
	Speed range	1: 100 (SVC),  1: 1000 (FVC)
	Speed stability accuracy	±0.5%(SVC), ±0.02%( FVC)
	Torque control accuracy	±5%( FVC)
	Overload capacity	G type: 150% rated current 60s; 180% rated current 3s. P type: 120% rated current 60s; 150% rated current 3s.
	Torque boost	Automatic torque boost; Manual torque is increased by 0.1%~30.0%
	V/F curve	Three ways: Linear; Multi-point type; V/F curve of N power type (1.2 power, 1.4 power, 1.6 power, 1.8 power, 2 power)
	V/F separation	Two methods: full separation, semi-separation
	Acceleration and deceleration curve	Linear or S-curve acceleration and deceleration mode. Four kinds of acceleration and deceleration time, acceleration and deceleration time range 0.0~6500.0s
	DC braking	DC braking frequency: 0.00Hz~ maximum frequency, Brake time: 0.0s~ 36.0s, Brake action current value: 0.0%~ 100.0%
	Jog control	Jog frequency range: 0.00Hz to 50.00Hz. Jog acceleration and deceleration time 0.0s~6500.0s.
	Simple PLC/multi-speed operation	Up to 16 segment speeds are possible with built-in PLC or control terminals.
	Built-in PID	It is convenient to realize the closed-loop control system of process control.
	Automatic voltage regulation (AVR)	When the grid voltage changes, it can automatically keep the output voltage constant.
	Over-voltage, over-current and Stall control	Automatic current and voltage limit during operation to prevent frequent over-voltage trip.
	Fast current limiting function	Minimize over-current faults and protect the normal operation of the drive.
	Torque limit and control	The "excavator" feature automatically limits the torque during operation to prevent frequent over-current tripping; The closed-loop vector mode enables torque control.
Personalized function	Excellent performance	The control of asynchronous motor and synchronous motor is realized with high performance current vector control technology.
	Non stop when instantaneous power failure	In the case of instantaneous power failure, the drive can continue to run for a short time by the load feedback energy.
	Virtual IO	Five sets of virtual DIDO, which can achieve simple logic control.
	Timing control	Timing control function: set time range 0.0Min~ 6500.0Min
	Multi-motor switching	Two sets of motor parameters can realize four motor switching control.
	Motor overheating protection	Optional motor overheat expansion card to accept motor temperature sensor input.
Running	Command source	Operation panel given, control terminal given, serial communication port given. There are several ways to switch command given sources.
	Frequency source	10 frequency sources: digital set, analog voltage set, analog current set, pulse set, serial port set. Can be switched in a variety of ways.
	Auxiliary frequency source	10 auxiliary frequency sources. It can flexibly realize auxiliary frequency fine-tuning and frequency synthesis.
	Input terminal	Standard: 5 DI digital input terminals (DI1~DI5), where DI5 supports high-speed pulse input up to 100kHz (to be specified when ordering). 2 analog input terminals (AI1 to AI2, AI1 only supports 0~10V voltage input, but AI2 supports 0~10V voltage input or 4~20mA current input) Expansion capability: 5 digital input terminals (DI6~DI10) 1 analog input terminal (AI3), supports -10, 10V voltage input and supports PT100.
	Output terminal	Standard: 1 digital output terminal (DO1) 1 relay output terminal (TA1-TB1-TC1) 1 analog output terminal (AO1), supporting 0~20mA current output. Expansion capability: 1 analog output terminal (AO1), supporting 0~20mA current or 0~ 10V voltage output 2 relay output terminals (TA2-TB2-TC2~TA3-TB3-TC3)
Control	RS485 communication terminal	RS485 communication interface, and support Modbus-RTU slave station communication protocol.
Display and keyboard operation	LED display	Monitor the drive state parameters.
	Key lock and function selection	To achieve partial or total key lock, define the scope of some keys to prevent misoperation.
	Protection function	Short-circuit detection, input and output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection, etc.
	Optional accessories	Brake module, IO expansion card, isolated RS485 communication card, differential input PG card, OC input PG card.
Environment	Installation location	Indoor, free from direct sunlight, no dust, corrosive gas, flammable gas, oil mist, water vapor, dripping water or salt, etc.
	Altitude	Below 1,000 m
	Ambient temperature	-10 ° C to +40 ° C (When the ambient temperature is 40 ° C to 50 ° C, please derate   by 1.5% per 1ºC increase)
	Humidity	Less than 95%RH, no condensation.
	Vibration	Less than 5.9m/(S^2) (0.6g)
	Storage temperature	-20ºC~+ 60ºC
	Protection Level	IP20

Wiring Diagram:

 

Installation Dimensions:

Size	Model	Installation size		Installation size			Installation aperture
		W1	H1	W	H	D	Φ
A1	2S-0.4GB 2S-0.75GB 2S-1.5GB 2S-2.2GB 2T-0.4GB 2T-0.75GB 2T-1.5GB 2T-2.2GB 4T-0.75G/1.5PB 4T-1.5G/2.2PB 4T-2.2G/4.0PB 4T-4.0GB	56	194	78	203	146	5.5
A2	2S-4.0GB 2T-4.0GB 4T-4.0G/5.5PB 4T-5.5G/7.5PB 4T-7.5GB	68	219	93	235	145	5

Size	Model	Installation size		Installation size			Installation aperture
		W1	H1	W	H	D	Φ
A3	2T-5.5GB 2T-7.5GB 4T-7.5G/11PB 4T-11G/15PB 4T-15GB	100	265	142	283	187	7
A4	2T-11GB 4T-15G/18.5PB 4T-18.5G/22PB 4T-22GB	120	289	150	305	202	7
A5	2T-15GB 4T22G/30PB 4T30GB	120	314	180	330	209	6.5
A6	2T-18.5G 4T-30G/37P 4T-37G/45P	160	367	268	380	245	6.5
A7	2T-22G 2T-30G 2T-37G 4T-45G/55P 4T-55G/75P 4T-75G	220	484	300	500	255	10
A8	2T-45G 4T-75G/90P 4T-90G/110P	220	612	300	650	270	10
A9	2T-55G 4T-110G/132P	220	639	310	680	320	10
A10	2T-75G 4T-132G/160P 4T-160G/185P	300	681	425	720	326	12
A11	4T-185G/200P 4T-200G/220P 4T-220G/250P	200	885	335	946	537	12
A12	4T-250G/280P	200	925	340	1012	585	13
A13	4T-280G/315P 4T-315G/355P	200	1085	340	1140	585	12
A14	4T-355G/400P	-	1082	650	1118	412	13
A15	4T-400G/450P 4T-450G/500P	-	1235	800	1264	483	16
A16	4T-500G/560P 4T-560G/630P 4T-630G/710P	-	-	900	1700	510	-

Optional Accessories: